Flange Measurement with ProFlange 100
Product information "Flange Measurement with ProFlange 100"
This video presents the measurement principle with our ancient system.
ProFlange® 100
ProFlange® 100 is the basic system for the measurement off flanges. It offers a digital-controlled sweep laser System, a suitable receiver and the ProFlange software. ProFlange was developed in combination with the larges windmill manufactures to meet their requirements.
Laser Tools
T405 Sweep LaserThe T405 is ideal for Flange Measurement. It is a very compact ca 100 mm Cube. It also has a motorised laser plane adjustment with bluetooth control.Rapid and precise Flange Measurement!ProFlange® is an ideal instrument for measuring and reporting Flange Flatness. You can measure 2 or more flange rings, analyze your results and plan correction if required. Typical flanges in wind power can be measured and reported in less than 30 min.The laser can buck in to the plane automatically. ( It can communicate with the sensor ) All you need are the following 3 elements. Supplied in a practical and small case.
T410 – Self Aligning Rotational and Levelling Laser The T410 is the first high precision, self calibrating and self aligning laser source in the world. The laser can be completely controlled by a PC. This device is the second generation of digital laser from Status Pro. Even a self aligning with the sensors is possible just by a click in the software. The complete equipment is connected by Bluetooth so that the handling is as easy as possible.
R260 Laser ReceiverThe R260 measures the position of the rotating laser beam. The CCD Sensor offers a total measurement range of 60mm.The laser-beam forms an reference plane. This reference plane can be measured by the R260.The Receiver offers a display on top in combination with a attachable mirror. So you can view the values from the front, the top and from behind! Additional there is a LED display on the front which indicates the current position of the laserbeam.By using the keypad at the side you can control the receiver and the laser. By using the bluetooth connection values can be automatically send to our software by pressing a "measurement" button.
Display Unit
DU420Rugged UMPC for industrial on-site. The UMPC offers protectors, shockproof design, holder for hand / arm. Shock resistantWater resistantOperating time up to 10 hours, without limit while using an external adapter via microUSB
Software
ProFlange® v3Professional Alignment Software for Flange Flatness MeasurementsExcellent user interface: Logical and user-friendly and nevertheless fully suitable for professional use.Automatic connection management, wireless via Bluetooth.Automatic sensor detection. Complete 3D and 2D Depiction.Easy-to-use touchscreen, no keyboard needed.Automatic calculation of the best reference.One-click-report in pdf and csv-measuredData can be stored on USB stick.
Mounting Accessory
Mounting Accessory for several Status Pro Laser Receivers.This adapter separates the holding function from the measuring function. It is essential for flange measurement for example. The linear guide and the probe-tip contact rather than a surface contact is essential for precision measurements. Inside is a spring mounted that ensures a good contact to the object.
Carbon TripodBig Carbon Tripod with extensions. Length: 180 – 2500 mm.For mounting a T430 laser an 3/8 inch adapter is required. Request.
Power Supply
Battery Pack For Laser T430, Receivers R260, R290, R540, R545 and Display Unit DU420. 7.4 V, 900 mAh, 6.7 Wh.
